hinges-hinge-systems

Adventure

Heavy duty friction hinge

For use on PVCu, timber or aluminium windows

The Adventure friction hinge is suitable for many commercial or heavy sash domestic applications on side or top hung windows.

Adventure has been developed by Titon’s experienced window fittings team and is tested to the latest hardware standards. All Adventure hinge dimensions and opening geometries have been calculated and designed to provide solutions on most window profiles.

The range is manufactured from high grade SS304 austenitic stainless steel, including the enclosed metal end cap, fitted for added strength compared to a standard hinge.

Features & Benefits

  • Suitable for larger, heavier sashes or commercial applications
  • Adjustable and controlled friction for smooth operation
  • Enclosed metal end cap for added strength
  • 16mm stack height.
  • Made from SS304 austenitic stainless steel for high corrosion resistance
  • Dimensioned drawings (including opening geometries) available on request
  • Additional Arm available
  • Fully dimensioned technical sheet available for each hinge
  • Free profile/section suitability advice available from the Titon Technical Department.

   Adventure Side Hung

Adventure Side Hung

Code Hinge Size (") Hinge Size
(mm)
Max Sash Weight (Kg) Opening Angle
(+/-2.5° )
Min Sash Width (mm) Max Sash Width (mm) Max Sash Height (mm) Box Quantity
TN5013A 10 262
34.5
83/50
262
660
1529
25 pairs
TN5014A 16
413
32/42/42 90/50/30 413
762
1619
25 pairs

Adventure Top Hung

Code Hinge Size (") Hinge Size
(mm)
Max Sash Weight (Kg) Opening Angle
(+/-2.5° )
Min Sash Height (mm) Max Sash Height (mm) Max Sash Width (mm) Box Quantity
TN5013A 10 262
50
50
262
650
2000
25 pairs
TN5014A 16
413
55/1001 50/301 413
800
2000
25 pairs
TN5015A 22 567 80/1002 45/202 567 1500 2000 10 pairs
TN5016A 26 687 100/1503 20/103 687 2500 2000 10 pairs

Adventure Top Hung

Code Arm Length (") Arm Length (mm) Box Quantity
TN5031A 10 nominal 250 25

All operating parameters are indicative and will vary according to window profile design and operating characteristics. Larger hinges may require an Addition Arm to achieve maximum performance.

Range developed and tested to enable windows to pass BS EN 14351-1.

1 Sash weight of 55Kgs to limit of 100Kgs, opening must be restricted to 30° using integral limit stop.
2 Sash weight of 80Kgs to limit of 100Kgs, opening must be restricted to 20° using integral limit stop.
3 Sash weight of 100Kgs to limit of 150Kgs, opening must be restricted to 10° using 2 x Additional Arm TN5031A or similar.

Note: The above are general minimum requirements, further limitations may be found necessary following customer trials/tests on their specific application.

Integral stops are not suitable for use as a safety restrictor.

 

 

 

Manufactured From

Austenitic stainless steel SS304.

Performance

Tested to 25,000 cycles.
Meets the requirements of BS EN 1670 Grade 4.

More information

enquiries@titon.co.uk / 01206 713801